The fuse for the cigarette lighter is located in the fuse box under the hood. It is a 20 Amp (yellow fuse) in position #32.
The Pontiac Aztek was a mid-size crossover marketed by Pontiac from the 2001 model year to the 2005 model year along with its rebadged variant, the Buick Rendezvous.
As a four-door crossover with a front engine and four-wheel drive, the Aztek featured a four-speed automatic transmission with a V-6 engine. Marketed by Pontiac as a "sport recreational vehicle," The Aztek used a shortened platform shared with GM's minivans (e.g., the Pontiac Montana) featuring 94 cubic feet of cargo room capable of carrying a 4' x 8' sheet of plywood with its rear seats removed. The design employed conventional rear swing-open rather than sliding doors and a bi-parting rear tailgate, the lower section formed with seat indentations and cup-holders. Other features included a rear center console that doubled as a removable cooler, rear stereo controls in the cargo area, a sliding cargo floor with grocery compartments and an available camping package with an attachable tent and inflatable mattress.
An electronic component is any basic discrete device or physical entity in an electronic system used to affect electrons or their associated fields. Electronic components are mostly industrial products, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components.
Electronic components have two or more electrical terminals (or leads) aside from antennas which may only have one terminal. These leads connect, usually soldered to a printed circuit board, to create an electronic circuit (a discrete circuit) with a particular function (for example an amplifier, radio receiver, or oscillator). Basic electronic components may be packaged discretely, as arrays or networks of like components, or integrated inside of packages such as semiconductor integrated circuits, hybrid integrated circuits, or thick film devices. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right.
Electrical wiring in general refers to insulated conductors used to carry electricity, and associated devices. This article describes general aspects of electrical wiring as used to provide power in buildings and structures, commonly referred to as building wiring. This article is intended to describe common features of electrical wiring that may apply worldwide. For information regarding specific national electrical codes, refer to the articles mentioned in the next section. Separate articles cover long-distance electric power transmission and electric power distribution.
Electric power distribution
Electrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics, and electromagnetism. This field first became an identifiable occupation in the latter half of the 19th century after commercialization of the electric telegraph, the telephone, and electric power distribution and use. It now covers a wide range of subfields including electronics, digital computers, power engineering, telecommunications, control systems, RF engineering, and signal processing.
Electrical engineering may include electronic engineering. Where a distinction is made, usually outside of the United States, electrical engineering is considered to deal with the problems associated with systems such as electric power transmission and electrical machines, whereas electronic engineering deals with the study of electronic systems including computers, communication systems, integrated circuits, and radar.
Filesystem in Userspace
Electricity distribution is the final stage in the delivery of electricity to end users. A distribution system's network carries electricity from the transmission system and delivers it to consumers. Typically, the network would include medium-voltage (1kV to 72.5kV) power lines, substations and pole-mounted transformers, low-voltage (less than 1 kV) distribution wiring and sometimes meters.
Filesystem in Userspace (FUSE) is an operating system mechanism for Unix-like computer operating systems that lets non-privileged users create their own file systems without editing kernel code. This is achieved by running file system code in user space while the FUSE module provides only a "bridge" to the actual kernel interfaces.
The original, and commonly used implementation, is implemented as a loadable kernel module. Released under the terms of the GNU General Public License and the GNU Lesser General Public License, FUSE is free software. The FUSE system was originally part of A Virtual Filesystem (AVFS), but has since split off into its own project on SourceForge.net.
Far Ultraviolet Spectroscopic Explorer
A distribution board (or panelboard) is a component of an electricity supply system which divides an electrical power feed into subsidiary circuits, while providing a protective fuse or circuit breaker for each circuit, in a common enclosure. Normally, a main switch, and in recent boards, one or more Residual-current devices (RCD) or Residual Current Breakers with Overcurrent protection (RCBO), will also be incorporated.
Distribution boards are also referred to as a:
The Far Ultraviolet Spectroscopic Explorer (FUSE) is a space-based telescope operated by the Johns Hopkins University Applied Physics Laboratory. FUSE was launched on a Delta II rocket on June 24, 1999, as a part of NASA's Origins program. FUSE detected light in the far ultraviolet portion of the electromagnetic spectrum, between 90.5-119.5 nanometres, which is mostly unobservable by other telescopes. Its primary mission was to characterize universal deuterium in an effort to learn about the stellar processing times of deuterium left over from the Big Bang. FUSE resides in a low Earth orbit, approximately 760 km (410 nmi) in altitude, with an inclination of 25 degrees and just less than a 100 minute orbital period. Its Explorer designation is Explorer 77.
On July 12, 2007, FUSE's final reaction wheel, which is required for accurately pointing a spacecraft, failed and efforts to restart it were unsuccessful. An announcement was made on September 6 that because the fine control needed to perform its mission had been lost, the FUSE mission would be terminated.