A pickup truck, often simply referred to as a pickup or pick-up, is a light motor vehicle with an open-top, rear cargo area (bed).
In North America, the term pickup is used for light trucks with a lighter duty chassis and factory built, integrated bed, as well as for coupé utility vehicles, often based on a personal car chassis, but also often on a special dedicated chassis for such use.
Vortec is a trademarked name for a line of piston engines for General Motors trucks. The name first appeared in 1988 on a 4.3 L V6 that used "vortex technology" to create a vortex inside the combustion chamber, creating a better air/fuel mix. Now it is used on a wide range of different engines. Modern Vortec engines are named for their approximate displacement in milliliters.
The Vortec 2200 (RPO codes L43 and LN2) is an OHV straight-4 truck engine. It is entirely different from the Iron Duke having been the last North American iteration of the GM 122 engine. The 2200 uses an iron block and aluminum 2-valve pushrod cylinder head. Output is 120 hp (89 kW) and 140 lb·ft (190 N·m). Displacement is 2,189 cc (2.189 L; 133.6 cu in) with an 89 mm (3.5 in) bore and 88.00 mm (3.465 in) stroke. 2200s were built in Tonawanda, New York.
The Chevrolet Express and GMC Savana are full-size vans from General Motors. They replaced the Chevrolet Van and GMC Vandura in 1996. The Express and Savana currently hold 44.8% of the full-size van market in the United States, just behind rival Ford's E-Series. The Express outsells the Savana by more than 3 to 1.
After 2003, the Express and Savana had updated front-end sheetmetal similar to the GMT800 light trucks and SUVs, and at the same time, fitted with the LS engines. The remainder of the body was not modified. In 2004 Stability Control (Stabilitrak) was added to all passenger vans. In 2008 the interior was updated and side impact roof airbags were standard on all passenger models. They also offer the E85 Flexfuel Vortec 5.3L V8 engine in both the 2008 Express 1500 Work Van and Passenger Van. The 6.6L Duramax Diesel V8 was added as an option for 2006.
The Chevrolet small-block engine is a series of automobile V8 engines built by the Chevrolet Division of General Motors using the same basic small (for a V8) engine block. Retroactively referred to as the "Generation I" small-block, it is distinct from subsequent "Generation II" LT and "Generation III/IV" LS, and "Generation V" (LT/EcoTec3) engines. Engineer Ed Cole, who would later become GM President, is credited with leading the design for this engine.
Production of the original small-block began in the fall of 1954 for the 1955 model year with a displacement of 265 cu in (4.3 L), growing incrementally over time until reaching 400 cu in (6.6 L) in 1970. Several intermediate displacements appeared over the years, such as the 283 cu in (4.6 L) that was available with mechanical fuel injection, the 327 cu in (5.4 L) (5.3L), as well as the numerous 350 cu in (5.7 L) versions. Introduced as a performance engine in 1967, the 350 went on to be employed in both high- and low-output variants across the entire Chevrolet product line.