The total water supply of the world is 326 million cubic miles (a cubic mile is a cube measuring one mile on each side). AnswerParty
Customary units in the United States
A cubic mile (abbreviation: mi3) is an imperial / U.S. customary (non-SI non-metric) unit of volume, used in the United States, Canada, and the United Kingdom. It is defined as the volume of a cube with sides of 1 mile (5280 feet, 1760 yards, ≈1.609 kilometre) in length.
There is no universally agreed symbol but the following are used:
United States customary units are a system of measurements commonly used in the United States. The U.S. customary system developed from English units which were in use in the British Empire before American independence. Consequently most U.S. units are virtually identical to the British imperial units. However, the British system was overhauled in 1824, changing the definitions of some units used there, so several differences exist between the two systems.
The majority of U.S. customary units were redefined in terms of the meter and the kilogram with the Mendenhall Order of 1893, and in practice, for many years before. These definitions were refined by the international yard and pound agreement of 1959. The U.S. primarily uses customary units in its commercial activities, while science, medicine, government, and many sectors of industry use metric units. The SI metric system, or International System of Units is preferred for many uses by NIST
Cubic crystal system
The system of imperial units or the imperial system (also known as British Imperial) is the system of units first defined in the British Weights and Measures Act of 1824, which was later refined and reduced. The system came into official use across the British Empire. By the late 20th century, most nations of the former empire had officially adopted the metric system as their main system of measurement, but some Imperial units are still used in the United Kingdom and Canada.
SI derived units
In crystallography, the cubic (or isometric) crystal system is a crystal system where the unit cell is in the shape of a cube. This is one of the most common and simplest shapes found in crystals and minerals.
There are three main varieties of these crystals:
Cubic metre per second
The International System of Units (SI) specifies a set of seven base units from which all other SI units of measurement are derived.
Each of these other units (SI derived units) is either dimensionless or can be expressed as a product of (positive or negative, but usually integral) powers of one or more of the base units. For example, the SI derived unit of area is the square metre (m2), and the SI derived unit of density is the kilogram per cubic metre (kg/m3 or kg m-3). The degree Celsius (see the table below) has a somewhat unclear status, and is arguably an exception to this rule.
A cubic metre per second (m3⋅s−1, m3/s, cumecs or cubic meter per second in American English) is a derived SI unit of volumetric flow rate equal to that of a stere or cube with sides of one metre (~39.37 in) in length exchanged or moving each second. It is popularly used for water flow, especially in rivers and streams, and fractions for HVAC values measuring air flow.
1 cubic metre per second is the same as: